Why is there no data when I have created a plant?【SOLARMAN Smart APP】

1. Please verify whether the data logger and inverter under your plant are online. If the data logger is offline, try reconfiguring the network. If the inverter is offline, try unplugging and replugging the data logger.

2. Manual selection: Based on your device: lf you only have a inverter please select the inverter data summation. lf an electricity meter is installed, it depends on the on-site installation.

• Related Articles

• How to add a data logger to the app.【SOLARMAN Smart】

  If the plant has already been created, click “Add Device” in the upper-right corner of the Home screen to proceed. You can also view the operation manual under “About SOLARMAN smart” in the menu bar.

• Why there is no data on my APP【SOLARMAN Smart and Business】

  If the logger or inverter are offline, there will be no data in the plant. Your logger is offline.Please plug and unplug the logger again and ensure that your inverter communication address is 1. If it is not working, please press and hold the reset ...

• P1 Meter Reader Connection and Use FAQ

  Q1: How can I determine if my meter is compatible? A1: There are two ways to determine: Method 1: Check if the meter has a "P1/RJ12" interface. Method 2: Check the table below: https://www.solarmanpv.com/is-my-smart-meter-compatible Q2: What are the ...

• P1 Meter Reader Basic Information FAQ

  Q1: Which scenarios does P1 Meter Reader (P1-2W) suit? A1: P1 Meter Reader is suitable for various household and personal energy consumption scenarios, such as: Home energy monitoring: View your home's real-time power consumption and electricity ...

• Flow Chart Display Issues【SOLARMAN Smart and Business】

  Overall Troubleshooting Approach 1. Verify data source accuracy 2. Confirm correct plant type selection 3. Ensure equipment is online 4. Check if the following scenarios resolve the issue 5. If all checks pass and scenarios fail to resolve, contact ...