I changed my router & network provider and then Solarman no longer works. How to deal with it? 【SOLARMAN Smart APP】

I changed my router & network provider and then Solarman no longer works. How to deal with it? 【SOLARMAN Smart APP】

If you changed new router or wifi password, please reset the logger, clear all configurations, and then rewire the network according to the manual.
​

Distribution Network Tutorial: Network Settings【SOLARMAN Smart APP】


    • Related Articles

    • P1 Meter Reader Connection and Use FAQ

      Q1: How can I determine if my meter is compatible? A1: There are two ways to determine: Method 1: Check if the meter has a "P1/RJ12" interface. Method 2: Check the table below: https://www.solarmanpv.com/is-my-smart-meter-compatible Q2: What are the ...

    • Network Settings

      Click here to watch the YouTube video tutorial on SOLARMAN Smart App Network Configuration Process Click here to watch the YouTube video tutorial on SOLARMAN Business App Network Configuration Process Primary Use Cases 1. After adding a new device, ...

    • P1 Meter Reader Troubleshooting FAQ

      Q1: What are the common causes of network configuration failure? A1: Please check the following points: WiFi frequency: Device supports 2.4GHz WiFi. (5GHz is not supported.) WiFi password: Password should be correct. WiFi signal : Signal should be ...

    • Why there is no data on my APP【SOLARMAN Smart and Business】

      If the logger or inverter are offline, there will be no data in the plant. Your logger is offline.Please plug and unplug the logger again and ensure that your inverter communication address is 1. If it is not working, please press and hold the reset ...

    • Solutions for Error Codes During Device Network Configuration

      Scenario 1: Error Code -1000 During Device Network Configuration Cause: Bluetooth not authorized, disabled, or unsupported Solution: Enable Bluetooth authorization for the SOLARMAN app in your phone's settings Scenario 2: Error Code -1001 During ...