Why can't I find any devices in Local Mode on a 4G device without Bluetooth?

Why can't I find any devices in Local Mode on a 4G device without Bluetooth?

Local Mode requires a connection via Bluetooth or an access point (AP). Since 4G devices without Bluetooth do not support AP functionality, they cannot detect the network and therefore cannot use Local Mode.

    • Related Articles

    • LS4G-6-G Data Logger After-Sales Troubleshooting SOP

      Scenario 1: Device Offline in 4G Mode 1. Check Hardware Connections 1.1 Ensure the 4G antenna is installed and securely fastened. 1.2 Open the SIM card slot to make sure the card is inserted in the correct direction with good contact. 2. Check SIM ...

    • P1 Meter Reader Troubleshooting FAQ

      Q1: What are the common causes of network configuration failure? A1: Please check the following points: WiFi frequency: Device supports 2.4GHz WiFi. (5GHz is not supported.) WiFi password: Password should be correct. WiFi signal : Signal should be ...

    • P1 Meter Reader Connection and Use FAQ

      Q1: How can I determine if my meter is compatible? A1: There are two ways to determine: Method 1: Check if the meter has a "P1/RJ12" interface. Method 2: Check the table below: https://www.solarmanpv.com/is-my-smart-meter-compatible Q2: What are the ...

    • Solutions for Error Codes During Device Network Configuration

      Scenario 1: Error Code -1000 During Device Network Configuration Cause: Bluetooth not authorized, disabled, or unsupported Solution: Enable Bluetooth authorization for the SOLARMAN app in your phone's settings Scenario 2: Error Code -1001 During ...

    • Inverter upgrade displays a device interaction failure.【SOLARMAN Smart】

      Data loggers and other devices such as inverters are experiencing transmission interruptions or serial communication anomalies. Please submit a support ticket with your device serial number (SN), screenshots, and other relevant information for ...