Why can I only see power generation data and not electricity consumption data?
If you currently have a microinverter device, due to the hardware capabilities and data collection logic of microinverters, only power generation-related information can be displayed. checking other parameters is not supported at this time.
Related Articles
The plant does not generate electricity at night, and the curve data of consumption【SOLARMAN Business】
Check if the non-working hours are set. At night, when the inverter is off, there is no production, only grid power, making it impossible to calculate the consumption. Enable the non-working hours setting, and when the inverter has no production, it ...
The electricity display shows MWh, but I wish to see more precise generation data.【SOLARMAN Smart】
Please log in to SOLARMAN Smart, click Menu -- open 'Display Preferences'. Here you can select W or kWh for power and energy units.
Why can I not view Electricity Consumption and Battery Data?【SOLARMAN Smart】
If you are the Plant creator, please navigate to Menu - Home settings - Edit - Grid and PV Status interface to input the required information. For energy storage systems, you should select: Grid supply - Self-consumption and sell to Grid - Storage ...
Solution for plant not displaying generation trend curve【SOLARMAN Business】
The plant device is not offline and is generating electricity normally, why is there no production trend curve? Troubleshooting: Click on the corresponding plant - Check the data source of the plant - Check if the corresponding device is currently ...
I have added an Electricity Meter to my Plant, but there is no Generation data. Why?【SOLARMAN Business】
Please check if your Electricity Meter configuration is correct. An Electricity Meter configured with a generation location is required for the Plant to correctly calculate Production. If you still have questions, Please submit your device SN and ...