When the flow chart load is negative, can the negative value be displayed? Or is the absolute value displayed instead? Or is 0 displayed?
The absolute value is displayed, but the flow direction will be reversed.
Related Articles
Flow Chart Display Issues【SOLARMAN Smart and Business】
Overall Troubleshooting Approach 1. Verify data source accuracy 2. Confirm correct plant type selection 3. Ensure equipment is online 4. Check if the following scenarios resolve the issue 5. If all checks pass and scenarios fail to resolve, contact ...
【Scenario FAQ Collection】Cases where plant data is not displayed or is incorrect, and corresponding solutions
Plant data not displayed 1、Why can I not view Electricity Consumption and Battery Data? 2、Flow Chart Display Issues Scene 1: Flow chart shows only generation, grid, and consumption data without battery metrics Scene 2: Power data and bar chart data ...
P1 Meter Reader Troubleshooting FAQ
Q1: What are the common causes of network configuration failure? A1: Please check the following points: WiFi frequency: Device supports 2.4GHz WiFi. (5GHz is not supported.) WiFi password: Password should be correct. WiFi signal : Signal should be ...
Why is there no data displayed on the chart【SOLARMAN Business】
Why is there no data displayed on the chart Data display depends on whether the devices under the plant are online normally. Please check the status of the data logger and inverter in the device column. If both the data date logger and inverter are ...
FAQ for June
SOC Issues Summary Issue 1: Battery charge level remains at a fixed value SOC data is transmitted from the inverter. The platform displays this data according to the protocol specified by the inverter manufacturer. Please contact the inverter ...