My Data Logger has been configured with the network, but it cannot connect to the Inverter.【SOLARMAN Business】

• Related Articles

• My Data Logger has been configured with the network but cannot connect to the Inverter.【SOLARMAN Smart and Business】

  The Inverter may not be connecting for the following reasons: 1. Check if the Inverter communication address is set to 1. 2. Verify if the Inverter baud rate is correct. 3. Re-insert the Data Logger. 4. Perform a cross-test with the Data Logger. 5. ...

• How to Export Device/Inverter/Data Logger Data【SOLARMAN Business】

  You need to log in to the SOLARMAN Business website: https://cnpro.solarmanpv.com/business Choose corresponding plant, locate the device, and follow the below path to export data p.s ：The data logger only collects data that transmitted from the ...

• The Data Logger cannot connect via Ethernet, but the network cable is connected to the computer, and the computer is online.【SOLARMAN Smart and Business】

  1: Confirm whether the Data Logger was previously configured with a static IP. You can reset the Data Logger to see if it can successfully connect to Ethernet. 2: Access the Router's backend settings interface to check if it's obtaining an IP address ...

• Add Logger【SOLARMAN Business Web】

  Add Logger【SOLARMAN Business Web】 1. In Monitoring > Plants, Click the plant where you want to add a logger 2. Click Add > Add New Gateway/Logger in the upper-right corner of the plant 3. Click Add > Enter the logger's SN to complete the additio ...

• Network Settings【SOLARMAN Smart APP】

  If the logger is equipped with a WiFi module, it is required to operate networking configuration to ensure normal communication. Go to「Device List」and check if there is "Networking Configuration" button. If not, it means networking configuration is ...