I have installed a DIN rail Data Logger, but why is only one Inverter detected?

• Related Articles

• Can one Data Logger be added to multiple Plants?【SOLARMAN Smart and Business】

  A data logger can only be added under one plant.. If multiple accounts require access to the Plant's data, you can grant them Authorisation to view your Plant.

• How to Export Device/Inverter/Data Logger Data【SOLARMAN Business】

  You need to log in to the SOLARMAN Business website: https://cnpro.solarmanpv.com/business Choose corresponding plant, locate the device, and follow the below path to export data p.s ：The data logger only collects data that transmitted from the ...

• LS4G-6-G Data Logger After-Sales Troubleshooting SOP

  Scenario 1: Device Offline in 4G Mode 1. Check Hardware Connections 1.1 Ensure the 4G antenna is installed and securely fastened. 1.2 Open the SIM card slot to make sure the card is inserted in the correct direction with good contact. 2. Check SIM ...

• Why date logger and inverter online but no plant data processing?【SOLARMAN Smart Web】

  Issue: The data logger and inverter are online normally, the data source settings are correct, but there is no data for the plant. Cause: This is due to both inverters under the plant being set as master, which prevents the platform from calculating ...

• My Data Logger has been configured with the network but cannot connect to the Inverter.【SOLARMAN Smart and Business】

  The Inverter may not be connecting for the following reasons: 1. Check if the Inverter communication address is set to 1. 2. Verify if the Inverter baud rate is correct. 3. Re-insert the Data Logger. 4. Perform a cross-test with the Data Logger. 5. ...