How to hide the Data Logger's AP.

How to hide the Data Logger's AP.

Please perform this operation via the web interface. Search for the on-site AP device, connect to it, then log in to 10.10.100.254 using the username and password: admin. Within the Setup Wizard, configure the network. At the third step of network configuration, the option 'Hidden AP' will appear. Tick this box and click 'Confirm' until the network configuration is complete.

    • Related Articles

    • Troubleshooting Guide for Data Logger Offline Issues

      Offline Processing Solution for WiFi Data Loggers Please try to reconfigure the network 1.Currently, only 2.4G network is supported, 5G is not supported. 2. If the signal strength of the selected network is <30, the connection is unstable. Please ...

    • How to Export Device/Inverter/Data Logger Data【SOLARMAN Business】

      You need to log in to the SOLARMAN Business website: https://cnpro.solarmanpv.com/business Choose corresponding plant, locate the device, and follow the below path to export data p.s ：The data logger only collects data that transmitted from the ...

    • LS4G-6-G Data Logger After-Sales Troubleshooting SOP

      Scenario 1: Device Offline in 4G Mode 1. Check Hardware Connections 1.1 Ensure the 4G antenna is installed and securely fastened. 1.2 Open the SIM card slot to make sure the card is inserted in the correct direction with good contact. 2. Check SIM ...

    • I cannot find my Data Logger in the WiFi list interface.

      Please press and hold the reset button for 10 seconds to reset the Data Logger (restore factory settings).

    • All indicator lights on the Data Logger are off.

      Please check if the Inverter is receiving power normally: If not powered normally: Please contact the Inverter Manufacturer for inspection. If powered normally: Please re-insert the Data Logger. If it still does not light up after re-insertion, ...