How should the configuration details for the Electricity Meter be completed?【SOLARMAN Business】

Please confirm your Electricity Meter's installation location. If it is a boundary meter, select 'Grid' as the installation location. If it is a grid-connected cabinet Electricity Meter, select 'production'. The current ratio should be entered based on the Electricity Meter transformer information. The voltage ratio is not applicable for non-high-voltage projects.

• Related Articles

• Meter Configuration【SOLARMAN Smart APP】

  The purpose of this function is to properly configure the meter connected to the SOLARMAN platform so that the data transmitted to the platform can be calculated and counted normally, and finally displayed in a suitable way. The following mainly ...

• Can I customise report templates?【SOLARMAN Business】

  Yes, you can do this on your computer. The navigation path is: Analysis - Reports - Report Templates. We currently support the creation of up to 10 custom report templates per merchant.

• I have added an Electricity Meter to my Plant, but there is no Generation data. Why?【SOLARMAN Business】

  Please check if your Electricity Meter configuration is correct. An Electricity Meter configured with a generation location is required for the Plant to correctly calculate Production. If you still have questions, Please submit your device SN and ...

• How to Change Electricity Revenue【SOLARMAN Smart】

  1. Click the Family Settings section in the menu panel 2. Locate the plant you wish to modify and tap Details 3. Find “Revenue per Kilowatt-Hour” under Family Information 4. Enter the desired electricity rate 5. Save to complete the setup 6. After ...

• Add Logger【SOLARMAN Business】

  Click here to watch the YouTube video tutorial on How to adda data logger SN 1. In Monitoring > Plants, Click the plant where you want to add a logger 2. Click Add > Add New Gateway/Logger in the upper-right corner of the plant 3. Click Add > Enter ...