Fixed IP Settings

Fixed IP Settings

Common use case: After a device successfully joins the network, it frequently goes offline.

The steps are as follows
1、Open a wireless network.
2、Select logger network (network name: AP+SN) and connect. The password can be found on the logger label, which are the characters behind PWD.


3、Open a browser and enter 10.10.100.254. Both username and password are admin.（Recommended browser: IE 8 +, Chrome 15+, Firefox 10+.)

4、Go to Wireless Settings and search WiFi at site.

5、Connect to target router.

6、 Enter the password and click Next.

    • Related Articles

    • Network Settings

      Click here to watch the YouTube video tutorial on SOLARMAN Smart App Network Configuration Process Click here to watch the YouTube video tutorial on SOLARMAN Business App Network Configuration Process Related Articles：Solutions for Error Codes During ...

    • P1 Meter Reader Connection and Use FAQ

      Q1: How can I determine if my meter is compatible? A1: There are two ways to determine: Method 1: Check if the meter has a "P1/RJ12" interface. Method 2: Check the table below: https://www.solarmanpv.com/is-my-smart-meter-compatible Q2: What are the ...

    • Open API FAQ Summary

      Once your API activation is complete, please refer to the documentation links below. They contain FAQs for various API scenarios, as well as information on account interfaces, device interfaces, plant interfaces, error code causes, and ...

    • I have changed my home WiFi password and need to reconnect. How do I do this?【SOLARMAN Smart】

      Please follow these steps for network connection: 1. Connect to the Data Logger's AP network: Locate the Data Logger network by opening WLAN on your phone or computer and searching for "AP_". xxxxxxxx" (where xxxxxxx is the Data Logger serial ...

    • P1 Meter Reader Troubleshooting FAQ

      Q1: What are the common causes of network configuration failure? A1: Please check the following points: WiFi frequency: Device supports 2.4GHz WiFi. (5GHz is not supported.) WiFi password: Password should be correct. WiFi signal : Signal should be ...