Does the LSW-Mini support the Modbus protocol?
Yes, it does. You will need to provide a compatible inverter or battery protocol, as well as the electricity meter to be controlled. We support the Firmcore architecture, which allows for quick customization and adaptation.
Related Articles
Does the product support Modbus?
Yes, it does. Modbus is a serial communication protocol. If you would like to learn more about specific product interfaces and other details, please search for the corresponding product model and refer to the installation guide or user manual for ...
P1 Meter Reader Troubleshooting FAQ
Q1: What are the common causes of network configuration failure? A1: Please check the following points: WiFi frequency: Device supports 2.4GHz WiFi. (5GHz is not supported.) WiFi password: Password should be correct. WiFi signal : Signal should be ...
Does the WiFi Data Logger support 5G networks?
Currently, only LSW-4 products support this; others do not. WIFI Band Identification PC: You can check whether the network band is 2.4G or 5G by viewing the properties in the Wi-Fi connection details. Mobile: Some phone models allow you to view the ...
P1 Meter Reader Connection and Use FAQ
Q1: How can I determine if my meter is compatible? A1: There are two ways to determine: Method 1: Check if the meter has a "P1/RJ12" interface. Method 2: Check the table below: https://www.solarmanpv.com/is-my-smart-meter-compatible Q2: What are the ...
Do the DTSD422-D3 and DTSD422 support the use of user-supplied CTs?
The DTSD422-D3 does not support CT replacement. For DTSD422 units used in applications exceeding 100A, you must provide your own CT and set the correct CT ratio.