Why date logger and inverter online but no plant data processing?【SOLARMAN Smart Web】
Issue: The data logger and inverter are online normally, the data source settings are correct, but there is no data for the plant.
Cause: This is due to both inverters under the plant being set as master, which prevents the platform from calculating values. It is necessary to contact the inverter manufacturer to set the inverters in a master-slave mode.
Related Articles
How to Export Device/Inverter/Data Logger Data【SOLARMAN Business】
You need to log in to the SOLARMAN Business website: https://cnpro.solarmanpv.com/business Choose corresponding plant, locate the device, and follow the below path to export data p.s ：The data logger only collects data that transmitted from the ...Why is the Inverter not displayed in the Plant, even though clicking on the Data Logger shows it is online?【SOLARMAN Business】
Please navigate to your Plant's Device page. On the Data Logger page, select the correct Data Logger and click the 'Lock' button on the right, then confirm after selecting the Inverter.Troubleshooting Guide for Data Logger Offline Issues
Offline Processing Solution for WiFi Data Loggers Please try to reconfigure the network 1.Currently, only 2.4G network is supported, 5G is not supported. 2. If the signal strength of the selected network is <30, the connection is unstable. Please ...How to delete a date logger under a plant?【SOLARMAN Smart】
1. Tap the device interface and locate the date logger 2. Tap the “...” next to the date logger 3. Tap the “Delete Device” button to remove it 4. If the “Delete Device” button is not visible on the device interface, this indicates the plant was not ...How to delete a date logger under a plant?【SOLARMAN Business】
Click here to watch the YouTube video tutorial on How to remove data logger from plants（SOLARMAN Business Web） 1. Click the Monitoring section and locate the plant with the device you wish to remove. 2. On the device interface, find the specific ...