All indicator lights on the Data Logger are off.
Please check if the Inverter is receiving power normally:
If not powered normally: Please contact the Inverter Manufacturer for inspection.
If powered normally: Please re-insert the Data Logger. If it still does not light up after re-insertion, please perform a cross-test on-site or replace the Data Logger.
Related Articles
How to Export Device/Inverter/Data Logger Data【SOLARMAN Business】
You need to log in to the SOLARMAN Business website: https://cnpro.solarmanpv.com/business Choose corresponding plant, locate the device, and follow the below path to export data p.s ：The data logger only collects data that transmitted from the ...
Troubleshooting Guide for Inverter Upgrade Failure【SOLARMAN Business】
scene1：Inverter upgrade failed due to a failure in parsing the display result. Reason for failure: The timeout setting for the upgrade task is too short, leading to a verification failure because the inverter and other devices have not completed the ...
Troubleshooting Guide for Data Logger Offline Issues
Offline Processing Solution for WiFi Data Loggers Please try to reconfigure the network 1.Currently, only 2.4G network is supported, 5G is not supported. 2. If the signal strength of the selected network is <30, the connection is unstable. Please ...
I cannot connect the WiFi Data Logger to the Router.
Please follow these steps for network connection: 1. Connect to the Data Logger's AP network: Locate the Data Logger network by opening WLAN on your phone or computer and searching for "AP_". xxxxxxxx" (where xxxxxxx is the Data Logger serial ...
LS4G-6-G Data Logger After-Sales Troubleshooting SOP
Scenario 1: Device Offline in 4G Mode 1. Check Hardware Connections 1.1 Ensure the 4G antenna is installed and securely fastened. 1.2 Open the SIM card slot to make sure the card is inserted in the correct direction with good contact. 2. Check SIM ...